Insulation that
pays you back.
A premium EPS thermal envelope is not a cost. It's an asset on your roof. Reduce the load on your AC system, lower your bills, and recover the spend in under two years.
Rakho ghar ko thanda, jeb ka bojh halka.
Drag the slider.
Feel the difference.
An uninsulated Karachi roof can hit 70°C. TKG sheets sit between the heat and your slab, blocking up to 80% of the transfer before it ever reaches your rooms. Your AC fights less. Your bill drops.
Khud dekho. Fark mehsoos karo.
The numbers that matter
Install once. Recover in under two years. Save for two decades.
Less heat in means less AC work, every month, every year.
Your bill savings pay back the install. Everything after that is pure return.
EPS keeps 94% of its R-value after 15 years. Install once. Benefit for decades.
Where TKG goes to work
Built or unbuilt, home or factory: there's a TKG method. We look at it first, then recommend.
How a Project Runs
No guesswork, no surprises. Four steps from your first message to a cooler home.
Contact us
Tell us about your heat problem and the size of your roof or walls. WhatsApp or call, takes five minutes.
We plan it out
We recommend the right density, method and material. You get honest pricing upfront before anything is decided.
You commit
Review the plan and pricing. No pressure. If it works for you, we get started. If not, no hard feelings.
Installation, your way
We connect you with trusted installation partners, or you can use your own contractors. Timeline depends on the size and scope of your project.
Pioneers, not resellers.
We manufacture our own EPS in North Karachi. We don't import and resell. Our sister company Saudagar EPS Industries has run in Lahore even longer. Every batch is tested to ASTM standards. Three decades of getting it right.
What customers are saving
Numbers from actual TKG installations across Karachi, not estimates.
How TKG EPS compares
A side-by-side comparison of every insulation option available in Pakistan today.
| Product | R-Value / inch | Density | Cost | Lifespan | Moisture | Installation | Payback | Safety |
|---|---|---|---|---|---|---|---|---|
| TKG EPS | 3.8 to 4.4 | 10 to 36 kg/m³ | Low to Med | 20 to 30+ yrs | Excellent | Simple | 18 to 24 mo | Non-toxic |
| Fiberglass | 2.2 to 2.7 | Fixed | Low | 15 to 20 yrs | Absorbs water | Moderate | 3 to 5 yrs | Irritant |
| Spray Foam | 3.7 to 6.5 | Fixed | Very High | 20+ yrs | Good | Specialist | 6 to 10 yrs | Off-gasses |
| Heat Paint | Near zero | N/A | Low | 2 to 3 yrs | Surface only | Easy | Never | Mild fumes |
| Bare Concrete | 0.08 | N/A | Low | Permanent | Cracks | Major work | No savings | Safe |
R-values are approximate industry standards and vary by thickness and conditions.